Arb RD131 Manual de usuario descargar pdf (Pagina 25)

5 Installing the Air System

5.1 Mounting the Solenoid

5.1.1 Connection to an ARB Air Compressor (Fig.15.)

 Remove one of the 1/8” BSP plugs from its port in the compressor

tank.

 Apply Teflon paste to the nipple (1/8” X 1/8” BSP) and insert it into

the port and tighten.

 Apply Teflon paste to the free end of the nipple.

 Assemble the inlet port side of the solenoid (stamped with a ‘1’)

onto the nipple and tighten. The solenoid should be rotated into a

position that does not obstruct any other ports on the compressor

tank.

NOTE : The solenoid exhausts compressed air through the

center of the black retaining cap when the Air Locker

is disengaged. Make sure this orifice cannot be

obstructed.

 Apply Teflon paste to the threads of the 5mm push-in fitting and

assemble it into the solenoid outlet port (stamped “2”) and tighten.

ARB

Air Compressor

Figure 15.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

Sin comentarios

Arb RD131 Manual de usuario Pagina 25